Saguaro Group
DNP
32 years experience - 1978 -2010 - pioneers in the card industry of Australasia .
32 years experience - 1978 -2010 - pioneers in the card industry of Australasia .
|
|
|
The Pro-Series range is CIM's premier product for medium volume applications, and using the CIM Multi-Modular concept, units can be used individually or as a dedicated processing system, there are a number of specifications, however as a guide:
The Combi 1000 is a unique unit, combining a thermal printer (colour or mono), flip station, encoder, embosser and tipper in the one unit. I The Combi can emboss up to 500cph in a typical credit card format, and is faster if used solely for single side thermal printing, however the flexibility allows dual side thermal printing, encoding, embossing and tipping in the one card pass.
The E1000 and E2000 are dedicated embossing units with encoder and colour tippers having either single or dual head embossers respectively. They multitask, operating at:
Both units allow up to 11 line embossing and come with switchable loco/hico encoding, with optional chip station.
Both units use the new CIM thermal print module and new card clean system to ensure 100% card cleaning before printing and switchable loco/hico encoding, with optional chip station. Pro-Series 3000 Mailer The Pro-Series Inserter (CIMailer) has gained great acceptance worldwide from both Bureaus and issuers. It has proven to be a great advantage for medium scale mailing runs, which are becoming the norm, whilst at the same time handling large 24/7 issues. The Pro-Series 3000 is a new high speed version of the 1500 (original model) and later 2000 version, which allows production of up to 1500 cards per hour and features the new optional MaxiMailer system allowing a range of inserts to be added.
The 3000 can attach up to 4 cards per carrier, and comes standard with magnetic stripe reader, optional bar code reader as noted. All Pro-Series units can be run as part of the Multi-Modular system noted below. The CIM MultiModular concept The concept of an in-line processing system has great merits, especially for a card issuer who has very few card types and does not have trained staff. However, it’s ease of use in such an environment is also a large draw back – if one module has broken down, the machine as a whole cannot run, and for Bureau’s high speed in-line units typically produce very low hourly throughput rates due to short file lengths and card type changes. CIM is cognisant of a need in some cases to operate machines in line, for example a simple embossing and mailing job would see the E2000 embosser and 3000 Inserter connected. However, whilst this functionality exists, and can be quickly and easily accommodated, the large increase in card types and shorter run lengths typically show Bureau’s gain greater flexibility in running machines as separate units, but allowing 100% verification between each for multi processes. The CIM MultiModular concept allows operation with both options. Email us for specifications to suit your requirement. For More Information Contact: |
|
Quick contacts: phone 0435 188 289 in Australia, 0272 401 959 in New Zealand Send mail to
Theo@saguarolimited.com with
questions or comments about this web site.
|
CIM 6
station multifeeder
